XADO Revitalizant EX 120 for all types of fuel equipment and fuel injection system

XADO Revitalizant EX 120 for all types of fuel equipment and fuel injection system

Reinforced revitalizant.

The product is designed to protect from wear and to provide restoring repair of all types of fuel equipment of gasoline and diesel engines.

Due to its by 20% greater* active agent’s concentration, it offers strong restoration potential to the worn out surfaces and wear protection.

* compared to XADO gel-revitalizant for fuel equipment. During the treatment of fuel pumps the product forms a metal-ceramic coating on the surfaces of the friction metal parts. As a result, the geometry of all parts is restored.

Revitalizant is universal for all types of fuel systems, including K-\KE-\L-Jetronic, Common Rail, Pumpe Düse etc.

The dosage depends on the oil system capacity.

Technical information

Application instructions:

Treatment of engine fuel equipment with capacity of up to 5 L

1. Press out the content of the syringe into a fuel tank with minimal fuel content.
2. Fill the tank with 40 L of fuel.
3. Run the car in normal mode.
4. The treatment is considered complete after about 100 hours of the mechanism operation (approx. 3000 km of run).


Engine capacity, L




Number of syringes (8 ml), pcs




Treatment procedure





It is recommended to clean the engine fuel system before application of the product. Other (non-standard) filtering devices may reduce the revitalization effect.


Syringe, 8 ml (XA10033)

  • Restores geometry and protects the friction parts of fuel pumps of all types, jets and pump-injector units against wear;
  • Reliably protects from low-quality fuel;
  • Reduces fuel consumption;
  • Decreases noise and vibration level;
  • Decreases the level of toxic components in the exhaust gases.
  Bad            Good
captcha ->