XADO Atomic Metal Conditioner MAXIMUM for Diesel Trucks with 1 Stage Revitalizant
Product contains Revitalizant New 100% effect

XADO Atomic Metal Conditioner MAXIMUM for Diesel Trucks with 1 Stage Revitalizant

Multifunctional oil additive Atomic metal conditioner XADO Maximum for Diesel Trucks is specially designed for diesel engines of heavy-duty automobiles.

Application:

The temperature of the compound before application should not be lower than +25.

  1. Shake the bottle.
  2. Apply* the compound into the oil filler neck of the engine, warmed up to the operating temperature.
  3. Start the engine and provide its idle operation for 3-5 minutes.

*Granules of atomic revitalizant are completely dissolved in motor oil under operating temperature.

Note:

Specially designed for diesel engines with turbocharging which operate under high loaded modes (SHPD − Super High Performance Diesel, UHPD − Ultra High Performance Diesel). Compatible with all types of motor oils. Revitalization takes place during 1000-1500 km. It is not recommended to change oil during this period.

Dosage:

1 bottle (1000 ml) for the engine with an oil capacity system with 30-45L volume. Oil level should not exceed the maximal level of oil gage. Avoid overdosage!

Package:

Box, bottle 950 ml (XA 40712)

This innovative 3-component product combines the advantages of two-phase complex metal conditioner and 1 Stage REVITALIZANT®.

  • 1 Stage Revitalizant forms a ceramic-metal coating on the parts’ surfaces, thus, restoring the operation surfaces and compensating the current wear of engine parts;
  • Metal conditioner strengthens the lubricating film, provides extra level of antiwear protection, perfectly combined with the revitalizant;
  • 2D Sliding Agent provides ultralight sliding between the engine parts.

Benefits:

  • Restores surfaces of parts and compensates the current wear;
  • Levels and increases compression in cylinders;
  • Increases pressure in oil system up to the nominal one;
  • Creates the active system of parts protection from loadings and overheating;
  • Reduces noise and vibration level;
  • Improves the lubricating properties of oil and tribological characteristics of engine units;
  • Reduces fuel consumption;
  • Increases engine compression and acceleration capability;
  • Guarantees antiwear engine protection for 100 000 km.
  Bad            Good
captcha ->