Gel-Revitalizant for compressors and bearings

Gel-Revitalizant for compressors and bearings

Designed for wear protection and restoring repair of bearings in the oil bath as well as compressor units and parts of all types (except the oxygen ones). It prolongs the service life of units and mechanisms by 2–4 times and significantly reduces energy and resource consumption.

Application:

  1. Compressor (bearing unit) treatment with the oil bath capacity of 5–7.5 liters.
  2. Squeeze out the contents of one tube into the oil filler neck of the compressor (unit) warmed up to the working temperature.
  3. Run the compressor (mechanism) as usual.
  4. Follow the same application instructions after 8–12 hours of the compressor (unit) operation.
  5. Follow the same application instructions after 8–12 hours of operation after Stage 2.

Technical info:

Main characteristics of the metalloceramics coating:

Microhardness — 750 kgf/mm2;

High corrosion stability;

Roughness Ra up to 0.06 μm.

Package:

Tube 9 ml (XA10906)


 

Features:

  • Eliminates gaps and beat of bearings.
  • Compressors obtain the nominal param
  • eters much faster. Significantly decreases noise and vibrations.
  • Decreases the consumption of energy carriers during compressor operating.
  • Stabilizes oil pressure.
  • Decreases working temperature of units.
  Bad            Good
captcha ->