Gel-Revitalizant EX 120 for Gearboxes

Gel-Revitalizant EX 120 for Gearboxes

Gel-Revitalizant EX 120 for Gearboxes is designed for restoring repair of the gearboxes, bearings and other units of transmissions and protection for wear-out.

The gel forms a new cermet coating on friction surfaces with unique properties and restores geometry of the parts.

Technical info:

General characteristics of the cermet coating:

  • Microhardness – 750 kg/mm2;
  • High corrosion resistance;
  • Gritness Ra up to 0,06 mkm.


Squeeze out the Gel-Revitalizant into a gearbox, transfer case or axle gearbox.


The volume and dosage ares shown in the Table below.

Oil system volume (L) Number of tubes (pcs.) Treatment scheme
1-2 1 once
2-5 2 once
5-8 3 once

The processing is considered to be completed after 50 hours of operation (1500 km).


  • The feature of revitalization is a reduction of noise in the mechanism from the first miles. If after some time the improvement of the work stops that can be an indicator of the sever wear-out. In this case you should double recommended dose. 
  • If after 95-200 km the situation doesn’t improve, the most probable matter is a mistaken diagnostics.


Blister package, tube 9 ml (XA10333)


  • Restores and protects friction parts of transmissions against wear;
  • Eliminates scratches and bubbles on the work surfaces;
  • Restores geometry of the parts;
  • Optimizes frictional conformability of gears;
  • Decreases noise and vibration of the units by 10 times;
  • Increases accuracy of the gear-shift;
  • Improves synchromesh operation;
  • Contributes to reduction of fuel consumption (especially in all-wheel drive cars);
  • Maintains operation of the transmission units during 1000 km in case of oil leakage.


  Bad            Good
captcha ->