XADO® Universal industrial flush

XADO® Universal industrial flush

Designed for cleaning and degreasing of bearing assemblies, chains, flexible joints of technological equipment and vehicles. Can be used as cleaning solution or dissolvent of surfactants. Used as anticorrosive agent in metal production and for localization and preservation of corrosion spots by technological equipment operation.

Technical data:

  • Density at 20°С, kg/L                            0.785
  • Flash point in closed cup, °С                67
  • Pour point, °С                                       -63
  • Flush point, °С                                      198
  • End boiling point, °С                             242
  • Kinematic viscosity at 40 °С, mm²/s     1.38
  • Water content, %                                  ≥ 0.1
  • Content of mechanical admixtures, %  none

Application:

  1. Manually remove the old lubricant or cumulated deposits from the surface.
  2. Shake the aerosol can.
  3. Spray the agent on the assembly (part) from the distance of 10-15 cm.
  4. Dry off the surface. To remove the rest of deposits repeat spraying of the cleaning agent.
  5. After the deposits removing put new operating lubricant.

Note:

  • Commercial content!
  • Keep out of reach of children!
  • Aerosol can is under pressure!
  • Keep away from heat and sources of ignition at temperatures not exceeding +40 °C!
  • Use only in well-ventilated areas!

Package:

Aerosol can 320 ml (Аrt. XA 78006)

  • Quickly and effectively cleans the surfaces of press moulds in ceramic and glass manufacture.
  • Cleans and degreases operating friction pairs of technological equipment in machinery manufacturing, textile and leather industries.
  • Perfectly cleans treads and offset blanket of printing industry equipment.
  • Does not belong to flammable agents.
  Bad            Good
captcha ->