Verylube PLASTICOR

Verylube PLASTICOR

Plastic corrosion preventive coating for surfaces of non-painted fender flares and car bottom.

Rust preventive product designed to treat fender wells before assembling plastic protection.
Used for overall and local protection of a car body and strengthens existing coating.

Application:

1. Remove dirt, rust, and dust from the surfaces to be treated. 
2. Shake the can. 
3. Spray onto the surface at a distance of 20-30 cm. 
4. Apply 2-3 layers on the surfaces to be coated. Each next layer should be applied after short-term waiting. 
5. Wait 1-2 hours. Run your car or assemble plastic wings. 
 

Note!

The ambient air temperature while treating should be +15…20 °ะก. 
Excess of PLASTICOR can be easily removed with VERYLUBE TAR STAIN REMOVER. 
 

Package:

Aerosol can 500 ml (Art. XB 40125)

  • Highly resistant to chemical activity (weak acids, alkali, etc.)
  • Protects a car body from stone hitting, decreases noise and vibration.
  • Forms a thick volumetric coating possessing thixotropic properties.
  • Keeps high form stability (does not trickle down).
  • Resistant to the temperature up to +85 °C.
  Bad            Good
captcha ->